HT instruments PQA824 - Manual (Page 71)

PQA400 - PQA823 - PQA824
EN - 70
5.4.14. During a recording
After a recording is running, a real time check of parameters’s values and internal status is
shown by meter.
12/09/2006 – 16:55:10
GENERAL MENU
Recording results
Fig. 121: Recording Results screen - Recording running
1. Select “Recording Results” in GENERAL MENU.
2. Pressing ENTER or touch the correspondent icon at display. The below screen is
shown:
12/09/2006 – 16:55:10
INFO RECORDING RUNNING
Autonomy: 0 days – 22 hours 
Comments: EN50160
Start: 12/09/2006 16:57:00
Stop: Manual
Integration Period: 5 sec
Num. Periods: 345
Anomalies: 0 
MODIFY
Fig. 122: Info recording running screen
3. The below information are included in the above screen:
 Recording autonomy, in Days/Hours, of meter with the currents selections performed.
 Comments included in the relative section (see § 5.4.2).
 Type of recording start.
 Type of recording stop.
 Real time information about integration period performed by meter.
 Enable of cogeneration.
 Number of recorded voltage anomalies.
 Enable or disable of Flicker.
 Enable or disable of Inrush Current (only PQA82x).
 Detection of voltage Spikes (only PQA824).
 Type of selected system.
 Type of used clamp.
 Full scale of used clamp.
 Ratio of eventual external VT used.