HT instruments SOLAR300N - Manual (Page 106)

SOLAR300 - SOLAR300N
EN - 104
The following elements are indicated:
Nominal Voltage: Set nominal voltage
High Limit: Upper limit voltage
Low Limit: Lower limit voltage
Frequency: System frequency.
The total number of Voltage Anomalies occurred is also displayed (Events)
Within this page, the following keys are active:
 The
F3 and F4 keys (or the item MOD (+) and MOD (-) on the display) allow choosing
YES or NO for an Interconnected System
 The
ENTER key (or the smart icon on the display) confirms the choice previously made
and displays the table of the values complying with standard EN50160
 The
ESC key (or the smart icon ) exits the function and goes back to the “EN50160
analysis result” page (see Fig. 167)
This page shows:
 The global result of the analysis, highlighted in red, in case it is Not Ok and highlighted
in green if it is Ok
 Quantity histogram. The green bar indicates that the parameter complies with standard
EN50160, while the red bar indicates that the parameter does not respect the standard
Fig. 169: EN50160 analysis histogram
Within this page, the following keys are active:
 The up and down arrow keys move the vertical bar up and down, thus allowing the
display of the histogram of the quantities in the Analysis EN50160
 The
ESC key (or the smart icon ) exits the function and goes back to the “EN50160
analysis result” page (see Fig. 167)