HT instruments SOLAR300N User Manual

Page 127

Advertising
background image

SOLAR300 - SOLAR300N

EN - 125

This screen (Fig. 200) displays the harmonic values and the THD% value of voltage V23
and current I2 in a graph (scaled according to the Full scale Fs) or in a table. The values
displayed are percentage values of the fundamental or absolute values according to the
configuration set in the ANALYZER CONFIGURATION MENU -> ADVANCED.

Fig. 200: Phase 2 harmonics in three-phase 3-wire system or Aron system

The following keys are active on this page:
 The up (ZOOM+) or down (ZOOM-) arrow keys zoom in or out the histogram.
 The left and right arrow keys move the cursor left/right along the harmonics.
 The F1 key (or the PAG item on the display) advances to the following page of saved

values, relative to phase 3 harmonics.

 The F2 key (or the ARM V or ARM I item on the dislay) switches between voltage and

current harmonics relative to Phase 1.

 The F4 key (or the ARM PAG item on the display) displays the following harmonics

group. 0..9, 10..19, 20..29, 30..39, 40..49.

 The ESC key (or the smart icon on the display) to exit the function and go back to the

“Recording analysis” page (Fig. 181).

This screen (Fig. 201) displays the harmonic values and the THD% value of voltage V3
and current I3 in a graph (scaled according to the Full scale Fs) or in a table. The values
displayed are percentage values of the fundamental or absolute values according to the
configuration set in the ANALYZER CONFIGURATION MENU -> ADVANCED.

Fig. 201: Phase 3 harmonics in three-phase 4-wire system

The following keys are active on this page:
 The up (ZOOM+) or down (ZOOM-) arrow keys zoom in or out the histogram. .
 The left and right arrow keys move the cursor left/right along the harmonics.
 The F1 key (or the PAG item on the display) advances to the following page of saved

values, relative to neutral. .

 The F2 key (or the ARM V or ARM I item on the dislay) switches between voltage and

current harmonics relative to Phase 3. .

 The F4 key (or the ARM PAG item on the display) displays the following harmonics

group. 0..9, 10..19, 20..29, 30..39, 40..49. .

 The ESC key (or the smart icon on the display) to exit the function and go back to the

“Recording analysis” page (Fig. 181). .

Advertising
This manual is related to the following products: