HT instruments SOLAR300N User Manual
Page 139
SOLAR300 - SOLAR300N
EN - 137
The following keys are active on this page:
The
F1 key (or the PAG item on the display) advances to the following page
of saved values.
The
ESC key (or the smart icon on the display) to exit the function and go
back to the “Recording analysis” page (Fig. 181).
In this page, the following symbols are used:
Patt System total active power.
Preatt Total reactive power.
Papp Total apparent power.
Pf
Total power factor.
CosPhi
System total CosPhi.
CosPhi represents the theoretical limit value which
can be reached by the Power factor if all harmonics
are eliminated from the electrical system. For
dimensioning a power factor correction system,
reference is usually made to the CosPhi parameter
value.
Fig. 223: Page 2/5 of numeric values for three-phase 3-wire system
The following keys are active on this page:
The
F1 key (or the PAG item on the display) advances to the following page
of saved values.
The
ESC key (or the smart icon on the display) to exit the function and go
back to the “Recording analysis” page (Fig. 181).
In this page, the following symbols are used:
V1PE
Phase L1 - PE Voltage.
I1
Phase L1 current.
Patt1
Phase L1 active power.
Preatt1 Phase L1 reactive power.
Papp1
Phase L1 apparent power.
Pf1
Phase L1 power factor.
CosPhi1 Cosine of the phase delay between the
Phase L1 voltage and current
fundamentals.
CosPhi represents the theoretical limit value which
can be reached by the Power factor if all harmonics
are eliminated from the electrical system. For
dimensioning a power factor correction system,
reference is usually made to the CosPhi parameter
value.
Fig. 224: Page 3/5 of numeric values for three-phase 3-wire system