HT instruments SOLAR300N User Manual

Page 18

Advertising
background image

SOLAR300 - SOLAR300N

EN - 16

5.1.7. Memory type setting
The meter permits saving of recordings both in its internal memory (about 15Mbytes) and
by using an external compact flash (see § 5.7.5 for details) fitted (see Fig. 3). Regardless
of the capacity of the memory inserted, the maximum size of a recording is set to
32Mbytes. A Compact Flash memory of higher capacity will therefore be able to contain a
high number of recordings, each one of which will have a maximum size of 32Mbytes. For
the selection of memory type follow the below steps:

1. Move the cursor using arrows keys on field relative to “Memory type”, marked with blue

background:

Fig. 16: Memory type setting screen

2. Use F3 or F4 keys (alternatively touch MOD(+) o MOD(-)) to choose “INTERNAL” or

EXTERNAL” memory type.

3. Press SAVE or ENTER keys (or the smart icon

) to save the selected option and

confirm by “Ok”. This selected parameter will be present also after turning off the
meter.

4. Press ESC key (or the smart icon ) to exit by screen without saving any modify

5.1.8. “Touch screen” calibration
This operation is necessary if any internal features of “touch screen” display are not
correctly positionated or not more selectable by using the PT400 pointer

1. Select the “TOUCH” item inside the “General settings” section. The message “Do You

want to calibrate touch screen?” is shown by the meter. Confirm with “Ok”. The
herewith screen is shown:

Press and briefly hold stylus on the center of the target.

Repeat as the target moves around the sceen.

Fig. 17: Touch screen calibration screen

2. By pressing and soft hold the PT400 pointer on the central point of the cross cursor

(see Fig. 17) move the cursor to the four corners of display

3. Switch off and thane turn on the meter by means of ON/OFF key to complete the

operation

Advertising
This manual is related to the following products: