HT instruments SOLAR300N - Manual (Page 181)

SOLAR300 - SOLAR300N
EN - 179
8.3.1. Replacement internal battery
CAUTION
Only qualified technicians should operate the instrument. Before replacing
the batteries disconnect the test leads from circuit under voltage in order to
avoid electrical shocks.
1. Disconnect voltage test leads and transducer clamps from any circuit on test
2. Turn off the meter and disconnect all test cables from it
3. Unscrew the screw of battery cover and remove it
4. Disconnect the old battery from internal connector and insert the new in the same side
5. Reposition the cover and fasten it with the proper screw
6. Use the appropriate battery disposal methods for your area
8.4. CLEANING
Use a soft dry cloth to clean the meter. Do not use never wet clothes, solvents, water etc..
and take particular care at TFT display.
8.5. END OF LIFE
CAUTION: this symbol indicates that equipment, batteries and its accessories
shall be subject to a separate collection and correct disposal.