HT instruments SOLAR300N - Manual (Page 184)

SOLAR300 - SOLAR300N
EN - 182
Energy – Single-phase and Three-phase systems – 50/60Hz
Parameter
[Wh,VArh,VAh]
FS clamp
Range
[Wh,VArh,VAh]
Resolution
[Wh,VArh,VAh]
Accuracy (*)
Active energy
Reactive energy
Apparent energy
FS  1A 0 – 999.9k 0.1 – 0.001k (0.7%rdg) @
(Pf=1,Vmis>200V,Imis>10%FS)
(0.7%rdg) @
(Pf=1, Vmis > 200V,
Imis>10A if FS=200A)
(0.7%rdg +3dgt) @ (Pf<1 or
Vmis < 200V or Imis < 10%FS
or Imis <10A if FS=200A)
1A< FS  10A 0.000 – 99.99k 0.001k – 0.01k
10A< FS < 200A 0.00 – 999.9k 0.01k – 0.1k
200A< FS  3000A 0.0 – 9.999M 0.1k – 0.01M
(*) For STD clamp ; Vmis = Voltage at which Power is measured
Power Factor (Cos ) – Single phase / Three phase systems
Range Accuracy (°) Resolution (°)
0.20 1.00 1.0  0.6 0.01
Voltage / Current harmonics
Range Accuracy(*) Resolution
DC  25 a
(5.0%rdg+5digits) 0.1V / 0.1A 26 a  33 a
34 a  49 a
(*) Accuracy to add at correspondent TRMS paramters
Frequency
Range Accuracy Resolution
42.5 69.0Hz (0.2%rdg+1dgt) 0.1Hz
Flicker – Single phase / Three phase systems
Parameter Range Accuracy Resolution
Pst1’, Pst
0.0 10.0
compliance to
EN50160
0.1
Plt
Irradiation measurement (by means of remote unit SOLAR-01 and imput PYRA)
Range Accuracy Resolution Overcharge protection
0.00 12.00mV
(1.0%rdg+5dgt)
0.01mV
5V
0.00  40.00mV 0.02mV
Temperature measurement (by means of remot unit SOLAR-01 and input TEMP with PT1000 probe)
Range Accuracy Resolution Overcharge protection
0  100°C (1%rdg+2dgt) 1°C 5V