HT instruments SOLAR300N - Manual (Page 57)

SOLAR300 - SOLAR300N
EN - 55
 Function CMP/EXP: used to compress / expand the sub-levels (the left and right arrow
keys have the same function)
 Function PRESET: used to open the preset configuration section (see § 5.4.2.14)
 Function SEL: used to select/deselect parameters in different levels.
 Function MODIFY: used to make any modification inside the levels.
On the bottom of the display, the instrument displays the Recording autonomy in terms
of hours and days, which dynamically updates according to the parameter selections
made.
5.4.1.1. Item Comments
This option allows inserting and/or modifying a comment line on the display, in order to
identify the type of analysis, which will also appear in the print report downloaded onto the
PC by the instrument. A comment can be set both by means of the supplied TopView
software (for information, please refer to the help on line of the software) and interactively
using the virtual keyboard which can be activated by pressing the F4 key (or item MODIFY
on the display). The flag of this voice is always active and cannot be deselected.
5.4.1.2. Use of the virtual keyboard
With the Comments item: highlighted in blue, press the F4 key (or item MODIFY on the
display). The following screen of the virtual keyboard is shown on the display:
Fig. 106: Virtual keyboard screen
The following table reports the description of the keys of the virtual keyboard:
Keys Description
a, b,c,…z
Standard alphabetic keyboard for typing in the comment
in small letters up to 25 characters
Cap Changes the keyboard to capital letters A
Z
123
Changes the keyboard with numeric characters 0
9 and
symbols for mathematical operations (+,-,*,/,.,=)
Sb
Group of special characters. Press “abc” to go back to
alphabetic display.
àž
Group of special characters with particular accents. Press
“abc” to go back to alphabetic display.
<- Backspace key to delete the digit on the left of the cursor
Table 1: Description of function keys of the virtual keyboard