HT instruments SOLAR300N - Manual (Page 94)

SOLAR300 - SOLAR300N
EN - 92
5.6.2. During a recording
After a recording is running, a real time check of parameters’s values and internal status is
shown by meter.
12/09/2006 – 16:55:10
GENERAL MENU
Recording results
Fig. 149: Recording Results screen - Recording running
1. Select “Recording Results” in GENERAL MENU
2. Pressing ENTER or touch the correspondent icon at display.
The below screen is shown (with NPV system set):
12/09/2006 – 16:55:10
INFO RECORDING RUNNING
Autonomy: 0 days – 22 hours

Comments: EN50160
Start: 12/09/2006 16:57:00
Stop: Manual
Integration Period: 5 sec
Num. Periods: 345
Anomalies: 0 
MODIFY
Fig. 150: Info recording running screen
3. The below information are included in the above screen:
 Recording autonomy, in Days/Hours, of meter with the currents selections performed.
 Comments included in the relative section (see § 5.4.2.1).
 Type, date and time of recording start
 Type of recording stop
 The Integration Period set
 Real time information about integration period performed by meter
 Enable of cogeneration
 Number of recorded voltage anomalies
 Type of selected system
 Type of used clamp
 Full scale of used clamp
 Ratio of eventual external PT used