HT instruments SOLAR300N - Manual (Page 95)

SOLAR300 - SOLAR300N
EN - 93
The instrument displays the following screen (with PV system set):
Fig. 151: Screen with information about recording in progress with PV system set
4. The screen shown in Fig. 151 contains the following information:
 Recording autonomy of the instrument with selections made in Days/Hours
 Comments inserted in the relevant comment field of section “Analyzer setting” (see §
5.4.2.1).
 Type, data and hour when recording started
 Type of recording stop
 The Integration Period set
 The number of integration periods made in real time
 The type of photovoltaic system considered
 If the parameters of SOLAR-0x (Irradiation, Cell Temperature, Environmental
Temperature) are being recorded
 The type of clamp used
 The full scale selected for the clamps used
5. Pressing ESC key (or the smart icon ) to quit from the above screen.
Each recording running is stopped and results are automatically saved by meter by
pressing of GO/STOP key or as soon as the date/hour of automatic stop is reached.
The data will be recorded in a Reg file (NPV systems) or RegPV (for PV systems) and
you’ll have the possibility to view them on the display at all times (see par. 5.7.2)
CAUTION
 The only “Real Time Values” section is available during a recording
running. The message “Menu not available in recording” is shown by
meter if any section is selected. Stop recording pressing GO/STOP key
before select any section.
 ON/OFF key is disabled during a recording running. The message “
Recording running. Not available function” is shown by meter. Stop
recording pressing GO/STOP key before pressing this key.