HT instruments VEGA78 User Manual

Page 51

Advertising
background image

VEGA78

EN - 49

Press SAVE or ENTER keys (or the smart icon

) to save each selection and confirm by

“Ok”. The main screen of Fig. 85 is shown by meter at the end of the operation.
Press ESC key (or the smart icon ) to quit without saving and back to previous screens.

12/09/2006 – 16:55:10

RECORDING SETTINGS

- General Parameters

Frequency

- 

Voltages

Phase1-Phase2

Phase2-Phase3

Phase3-Phase1

22/251 Parameters – Autonomy: 38d 16h

CLP/EXP

PREDEF.

SEL

MODIFY

Fig. 94: General Parameters sub-level - Three phase 3-wire ARON system

The below parameters can be selected for recording in Three phase 3-wire ARON
systems:

Parameters Description

Frequency

Frequency of phases L1, L2, L3

Voltages

TRMS voltages L1-L2, L2-L3, L3-L1

Currents

TRMS currents L1, L2, L3

Active Power & Energy

Active power and energy L1-L2, L3-L2, Total

Reactive Power & Energy

Reactive (inductive or capacitive) power and energy
L1-L2, L3-L2, Total

Apparent Power & Energy

Apparent power and energy L1-L2, L3-L2, Total

Power Factor

Power factor L1-L2, L3-L2, Total

CosPhi

Power factor referred to fundamental of voltage and
current L1-L2, L3-L2, Total

Table 5: Selectable parameters for Three phase 3-wire ARON system

Press SAVE or ENTER keys (or the smart icon

) to save each selection and confirm by

“Ok”. The main screen of Fig. 85 is shown by meter at the end of the operation.
Press ESC key (or the smart icon ) to quit without saving and back to previous screens.

Advertising