HT instruments VEGA78 - Manual (Page 66)

VEGA78
EN - 64
5.5.1.2. Recording graph
By selecting the recording graph option, the following page is accessed, which enables the
user to display the recording trend (ONLY ONE parameter at a time).
Fig. 116: Selecting a parameter
1. Press the F1 key (or the PARAM item on the display) to access the page containing
the recorded quantities available for the analysis (Fig. 117).
Fig. 117: Parameter selection
The following keys are active on this page:
 The up and down arrow keys move the cursor along the quantity tree.
 The
F1 key (or the CMP/EXP item on the dislay) compresses and expands the tree of
the quantity highlighted by the cursor.
 The F2 key (or the SEL item on the dislay) selects or deselects the parameter
highlighted by the cursor.
 The ENTER key (or the smart icon on the display) confirms the selection previously
made and displays the graph of the selected parameter (Fig. 118).
 The CANC key deselects the parameter previously selected, independently from the
position of the cursor.
 The ESC key (or smart icon ) to exit the function and go back to the “Selecting a
parameter” page (Fig. 116).