HT instruments VEGA78 - Manual (Page 73)

VEGA78
EN - 71
5.5.2.2. Graph
This screen (Fig. 126) contemporarily shows the saved instant values of the waveforms of
voltages V1, V2, V3, Vn scaled according to the Full scale (Fs) and the relevant RMS
values; these values have been saved by the instrument upon pressing the SAVE key.
Fig. 126: Voltage scope in three-phase 4-wire system
The following keys are active on this page:
 The up (ZOOM+) or down (ZOOM-) arrow keys zoom in or out the displayed
waveforms.
 The F1 key (or the PAG item on the display) advances to the following page of saved
current values.
 The ESC key (or the smart icon on the display) to exit the function and go back to the
“Recording analysis” page (Fig. 124).
This screen (Fig. 127) contemporarily shows the saved instant values of the waveforms of
voltages V12, V23, V31 scaled according to the Full scale (Fs) and the relevant RMS
values; these values have been saved by the instrument upon pressing the SAVE key.
Fig. 127: Voltage scope in three-phase 3-wire system or Aron system
The following keys are active on this page:
 The up (ZOOM+) or down (ZOOM-) arrow keys zoom in or out the displayed
waveforms.
 The F1 key (or the PAG item on the display) advances to the following page of saved
current values.
 The ESC key (or the smart icon on the display) to exit the function and go back to the
“Recording analysis” page (Fig. 124).