7 probe setup, Probe setup – In-Situ Aqua TROLL 400 Operators Manual User Manual
Page 13
Advertising
800-446-1500
13
www.in-situ.com
Probe Setup
The probe is shipped with a storage plug and protective dust caps in place.
1
Dust cap protector on the RDO Sensor. (Install the RDO Cap before
deploying the instrument.)
2
pH/ORP storage plug. (Remove the storage plug and install the
pH/ORP sensor before deploying the instrument.)
3
Dust cap protector on the twist-lock cable connector.
Advertising
This manual is related to the following products: