In-Situ smarTROLL RDO Handheld Operators Manual - Manual (Page 14)

14
8. Make sure the batteries are in the battery pack.
9. Align the pins on the cable with the pins on the battery pack, then twist the outer
portion of the connector until the connection is secure.
Important: The RDO Sensor Cap must be installed firmly in place
to prevent water from entering the instrument.
iSitu Overview
About the iSitu App
The iSitu App is the user interface and control application for In-Situ Inc. handheld
water quality instruments. You can use iSitu on the Apple iPod Touch, and iPhone for
up to five devices per purchased license.
iSitu allows you to accomplish the following tasks.
l
View live readings that update every 10 seconds.
l
Change parameters and units.
l
Record data.
l
Email data in spreadsheet format.
l
Transfer data from mobile device to a computer.
l
Organize data by Site location.
l
Calibrate Sensors and View Reports
Estimated iPod Battery Life
The table below shows the estimated battery life for the iPod. The values are
dependent on the number of readings taken and the brightness setting on the display.
To change brightness settings, see Settings > Brightness & Wallpaper on the iPod.
*Values provided assume location services and WiFi enabled. Disabling these features
can provide an additional 0.5 to 1 hour of life.
**Default