Audiovox HD3HSML - Manual

3-Way HDMI Switcher
HD3HSML
Thank you for buying the 3-In 1-Out HDMI
Switcher. The switcher allows you to easily share a
single HDMI display or a HDMI-compatible TV with
three HDMI devices.
Features
• Supports 480i, 480p, 720p, 1080i and
1080p screen resolutions.
• Supports HDCP compliant devices.
• Easy to install and simple to operate.
Installation
1. Use HDMI cables to connect the HDMI
sources to the HDMI switcher inputs on the
rear panel.
2. Connect the cable from your HDMI display to
the switcher output.
3. Plug the supplied 5V DC adaptor into the
switcher DC input. The LED power indicator
lights green. Note: The power unit is intended
to be correctly oriented in a vertical or floor
mount position.
4. Select the desired input sources by pressing
the appropriate button on front of the switcher
or by using your remote control after
programming the Learning function of the
switcher outlined in the following section.
The related LED indicator on the front panel
indicates which input is selected. The default
input is INPUT1.
Learning Function
This switcher is equipped with a unique Learning
circuit, which allows it to learn the on/off com-
mands from your infrared component remote(s) so
that you can use them to toggle through inputs.
Note: After the Learning function is completed,
when a component is turned on, the switcher
automatically selects that input.
Follow these instructions to activate the Learning
function.
1. Press the LEARN key on the front of the
switcher panel. The LEARN LED light
turns on.
2. Press the INPUT key on the front of the
switcher for the component remote you
wish to program. For example, if you want
to program your DVD remote to operate the
switcher and your DVD is connected to
INPUT 2 on the back panel, press the
INPUT 2 key. The LED light for the input
you pressed turns on.
NOTE: When programming the Learning
function, be sure to double-check your
notes on the reference chart below to
determine which component is connected
to each input jack.
3. As you connect your components to the
input jacks, note which component you
have connected to each jack in the space
provided below. This information is
important to have handy and is necessary
when programming remotes to operate
the switcher.
4. Point your remote at the switcher then press
and hold the key on your remote that turns
on the component whose content you want
to play on your display device (HDTV). The
INPUT key LED light turns on. A few
seconds later, the LEARN LED indicator
light blinks for five seconds and turns off.
The INPUT LED indicator light turns back on.
5. The Learn function is complete. Your
remote now switches to the appropriate
source.
6. Repeat this procedure for each additional
remote you wish to program for compo-
nents connected to the other inputs.
Note: Universal remotes can also be programmed
in the same manner to operate the switcher. You
must be sure you have the remote in the opera-
tional mode that corresponds with the component
plugged into that input on the back of the switcher.
Specifications
Video Amplifier Bandwidth : 1.65 GHz
Format Support : Up to UXGA(1920x1200)
HDMI Input/Output Connector Type : Type A
Power Consumption : 1.2 W(max.)
Power Supply : 5 Volt(DC)
Care
• Keep the switcher dry.
• Use and store the switcher only in moderate
indoor environments. Handle the switcher
carefully; do not drop it.
INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Trade Name: Audiovox
Model(s): HD3HSML
Equipment Classification: Class B Digital Device
Responsible Party: Audiovox Corporation
111 Congressional Blvd.
Suite 350
Carmel, IN 46032
Customer Service: www.rca.com
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protec-
tion against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the instruc-
tions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the equip-
ment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
FCC Declaration of Conformity
Reorient or relocate the receiving antenna.
Increase the separation between the equip-
ment and receiver.
Connect the equipment into an outlet on a
circuit different from that to twhich the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help. •
•
•
•
12 MONTH LIMITED WARRANTY
Audiovox Electronics Corporation (the “Company”) warrants to the
original retail purchaser of this product that should this product or any
part thereof, under normal use and conditions, be proven defective in
material or workmanship within 12 months from the date of original
purchase, such defect(s) will be repaired or replaced (at the Company’s
option) without charge for parts and repair labor. To obtain repair or
replacement within the terms of this Warranty, the product along with
any accessories included in the original packaging is to be delivered with
proof of warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to the Company at the address shown
below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover product purchased,
serviced or used outside the United States or Canada. The Warranty
does not extend to the elimination of externally generated static or noise.
This Warranty does not apply to costs incurred for installation, removal
or reinstallation of the product, or, if in the Company’s opinion, the
product has been damaged through acts of nature, alteration, improper
installation, mishandling, misuse, neglect, accident, or the simultaneous
use of different battery types (e.g. alkaline, standard or rechargeable).
This Warranty does not cover damage caused by an AC adapter not
provided with the product.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S
LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY
ACTION FOR BREACH OF ANY WARRANTY HEREUNDER,
INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT
WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
No person or representative is authorized to assume for the Company
any liability other than expressed herein in connection with the sale of
this product.
Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you.
This Warranty gives you specific legal rights and you may also have
other rights which vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,
Unit 3, Door 16, Mississauga, Ontario L5T 3A5
©2007 AUDIOVOX CORPORATION
Trademark(s) ® Registered
Made in China
HD3HSML NA IB 01