Aiphone AXW-AVR User Manual
Instructions, Ax series audio-video adaptor for 3, Party transmission equipment
- INSTRUCTIONS -
The AXW-AVT and AXW-AVR are designed to allow connection of a standard AX-series audio video door
station (or audio-only IE-series door station) via the AXW-AVT, conditioning the signal for use with 3
rd
party
transmission equipment (fiber optics, Ethernet, etc.) and converting it back via the AXW-AVR to a signal
compatible with the AX-series exchange unit. External video input/output is provided at both adaptors to
allow 3
rd
party camera input, output to recording devices, etc. A motion detector or other activation device
can be connected to the Sensor input to trigger door / camera activation (AXW-AVT only). The units also
feature a relay output to trigger an external device, such as a DVR or video switcher local to either the AXW-
AVT or AXW-AVR whenever the audio and/or video is active. Alternatively, the AXW-AVT can be used to
adapt an AX-series audio video door station to a standalone third party device (video server, network DVR,
etc).
AX Series Audio-Video Adaptor for 3
rd
Party Transmission Equipment
Pg. 1
AXW-AVT TERMINAL DEFINITIONS:
DOOR (RJ-45 Jack):
RJ-45 connection from AX-series audio video door, or spliced audio only door (IE/
IF-series).
AUDIO IN/OUT:
Input / Output connections for audio transmission (line level, polarity indicated by
‘+’ and ‘-’).
CALL IN/OUT:
Transistor-switched input / output to be connected to relay input / output on
transmission equipment. ‘Call In’ indicates call placed by door station, ‘Call Out’
indicates master-initiated activity (polarity indicated by ‘+’ and ‘-’).
SENSOR NC, NC:
Normally Closed contact input, activates ‘Call In’ function when tripped by external
motion detector or other device with N/C contacts.
RELAY NO, NO:
Normally Open relay contact, activated whenever communication is active.
VIDEO IN:
Composite input signal from CCTV camera, if used in place of AX-series audio
video door station.
VIDEO OUT:
Composite output to external transmission equipment. Source dependent upon
CCTV / DOOR switch.
CCTV / DOOR SWITCH: Determines whether AX-series audio/video door station video (‘DOOR’ setting) or
external CCTV video (‘CCTV’ setting) will be present on ‘VIDEO OUT’ for
connection to external transmission equipment.
24V +, -
24V DC input (use Aiphone PS-2420UL).
AXW-AVT
CCTV DOOR
DOOR
OUT
IN
VIDEO
AXW-AVT
AUDIO
+ -
IN
OUT
+ -
+ -
24V
OUT
+ -
CALL
SENSOR
NC NC
RELAY
NO NO
+ -
IN
0311