Martel Electronics DPM750S-BL User Manual

Dpm 750s-bl, Features, Ordering information

Advertising
background image

FEATURES

• 12.7
• 200mV d.c. Full Scale Reading
• 3.0 to 7.5V or 6.0 to 15V d.c. Operation


• Bandgap Reference

mm (0.5") Digit Height

Programmable Decimal Points
LED Backlighting (30mA @ 5V typ.)

• Low Battery Warning

Auto-zero and Auto-polarity

ORDERING INFORMATION

Stock Number

Standard Meter

DPM 750S-BL

IP67 / NEMA 4X Bezel

BEZ 700-IP

ELECTRICAL SPECIFICATIONS

Page 2 of 4

Page 2 of 4

Page 1 of 4

www.lascarelectronics.com

Specification

Min.

Typ.

Max.

Unit

Accuracy (overall error) *

0.1

% (±1 count)

Linearity

±1

count

Sample rate

2.5

samples/sec

Operating temperature range

0

50

°C

Temperature stability

50

ppm/°C

Supply voltage

V+ to GND configuration

3

5

7.5

V d.c.

350

A

Backlight supply current @ 5V d.c.

30

mA

Input leakage current (Vin = 0V)

1

10

pA

V+ to V-

configuration

6

9

15

V d.c.

Supply current

V+ to GND configuration

500

A

V+ to V-

configuration

Backlight supply voltage

4.75

5.0

**

V d.c.

µ

µ

50 ***

° °

C F

µ

A

mV

k

MH

z

LASCAR ELECTRONICS LTD.
MODULE HOUSE
WHITEPARISH
WILTSHIRE

SP5 2SJ

UK
TEL: +44 (1794) 884567
FAX: +44 (1794) 884616
E-mail: [email protected]

LASCAR ELECTRONICS (HK) LIMITED
FLAT C, 5/FL., LUCKY FTY. BLDG.
63-65 HUNG TO ROAD
KWUN TONG

KOWLOON

HONG KONG
TEL: +852 2797 3219
FAX: +852 2343 6187
E-mail: [email protected]

SAFETY

To comply with the Low Voltage Directive (LVD 93/68/EEC), input voltages to the module’s pins must not exceed
60Vdc. The user must ensure that the incorporation of the panel meter into the user’s equipment conforms to the
relevant sections of BS EN 61010 (Safety Requirements for Electrical Equipment for Measuring, Control and
Laboratory Use).

TYPICAL APPLICATIONS

• Precision Instrumentation Systems
• Power Supply Monitoring
• Test Boxes
• Panel-Mount Indication
• Low Power Voltage Measurement

DPM 750S-BL

3½ Digit Backlit LCD Voltmeter Module

The DPM 750S-BL features a 200mV d.c. measurement range with auto-zero and auto-polarity. Decimal points are
user selectable.

LED backlighting ensures excellent readability under low light conditions. The module's

The meter features a negative rail generator which enables the meter to measure a signal referenced to

its own power supply GND. A low drift bandgap reference circuit ensures accurate readings over a wide temperature
range.

low cost means it will

suit high and low volume applications. This module is supplied with a plastic mounting bezel. A waterproof seal to
IP67 / NEMA 4X is achievable, using the optional BEZ 700-IP bezel.

* To ensure maximum accuracy, re-calibrate periodically.

** An external series resistor is required above 5V, see Applications.

*** This specification linearly derates to 30mA @ 50°C.

LASCAR ELECTRONICS INC.
3750 West 26th Street
Erie
PA 16506
USA
TEL: +1 (814) 835 0621
FAX: +1 (814) 838 8141
E-mail: [email protected]

PO Box 770, Londonderry, NH 03053 1-800-821-0023
www.martelcorp.com

page 1 of 4

Advertising