Aastra Telecom CT9143i - Manual (Page 14)

New Features in Release 2.3
10 RN-001029-02, Release 2.3, Rev 00
IP Phone Release Notes 2.3
Configuring LLDP-MED Using the Aastra Web UI
Use the following procedure to configure LLDP-MED using the Aastra Web UI:
Aastra Web UI
1 Click on Advanced Settings->Network->Advanced Network Settings.
2 The “LLDP” field is enabled by default. To disable LLDP, click the check mark in the box to clear the check mark.
3 In the “LLDP Packet Interval” field, enter the time, in seconds, between the transmission of LLDP Data Unit
(LLDPDU) packets.
The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default is 30.
4 Click to save your changes.
LLDP
LLDP Packet Interval