AMX Radia Eclipse 4-Channel Dimmer Module RE-DM4 User Manual
Radia eclipse dimmer modules
Advertising
Table of contents
Document Outline
- RE-DM4 / RE-DM6 - Operation/Reference Guide
- Radia Eclipse Dimmer Modules
- AMX Lighting Systems
- Installation
- Space Requirements
- Wiring Considerations
- Power considerations
- Conduit
- RDA Enclosure Dimensions
- Mounting AMX Lighting Enclosures
- High-Voltage Connections
- Connecting High-Voltage, Single-Phase Input Power and Loads
- RDA-ENC6B 120 VAC Single Phase Line Input
- RDA-ENC6B 120/240 VAC Line Input (Single Phase)
- Connecting High-Voltage Input Power and Loads
- RDA-ENC6B 120/208 VAC line input (three phase)
- RDA-ENC6B Three Phase Line Input Connector Reference
- RDC-PFC Power Distribution And Line Input References
- Installing RDM Modules Into an RDA Enclosure
- Low-Voltage Connections
- External power
- Dry Closures
- Default Settings
- Radia Lighting System Configuration Pages
- AMX RADIA Lighting Programming
- Overview
- Software
- Presets: Defined vs. Undefined Levels
- Lighting Systems Overview
- Programming Commands
- Control Curves and Low-End Settings
- Levels
- Default Settings
- Initial Level Status Reporting
- Channels
- SEND_STRINGs
- Ramp Dimmers Up
- Ramp Dimmers Down
- Stop Ramping Dimmer
- Ramp Active Preset Up
- Ramp Active Preset Down
- Stop Ramping Preset
- Recall Preset
- Record Preset
- Level Status
- Set Curve
- Curve Status
- Set Low End
- Low End Status
- Dimmer Status
- Reboot
- Set Default Level Time
- Set Default Preset Time
- Set Default Ramp Time
- Ramp To Level
- Undefine Dimmer
- Phase Query
- Version Query
- Factory Default
- SEND_COMMANDs
- Ramp Preset Up (NEW)
- Ramp Preset Down (NEW)
- Stop Ramping Preset (NEW)
- Recall Preset
- Record Preset
- Set Curve
- Curve Status (NEW)
- Set Low End (NEW)
- Low End Status (NEW)
- Reboot (NEW)
- Set Default Level Time
- Set Default Preset Time
- Set Default Ramp Time
- Ramp to Level
- Undefine Dimmer (NEW)
- Phase Query (NEW)
- Appendix A: AMX Lighting Curves
- Overview
- Curve Configuration
- Curves
- Standard Dimming Curve (1)
- Economical Dimming Curve (2)
- 0-10VDC Curve (3)
- 0-12VDC Curve (4)
- Lutron FDB Curve (5)
- Advance Mark VII Curve (6)
- 12% Roll Off (7)
- 19% Roll Off (8)
- 33% Roll Off (9)
- S-Curve #1 (A)
- Log-Curve #1 (B)
- Log-Curve #2 (C)
- S-Curve #2 (D)
- 10% Off Curve (N)
- Always OFF Curve (O)
- Always ON Curve (F)
- Appendix B: Troubleshooting