Avanti DW6W - Manual (Page 9)

9
NOTE:
Hard water conditions will adversely affect the washing performance of your dishwasher. Hard water
conditions will also contribute to ‘lime’ (white film substance) deposits and/or ‘scaling’ on the stainless steel
surface of the dishwasher tub and heater element, located in the sump underneath the removable filter
screen. To assist in minimizing these conditions, it is recommended to periodically operate/rinse the inside
of the dishwasher (empty) using 1 cup of white vinegar at least once a week.
Disconnecting your Dishwasher
• Shut off the hot water supply at the faucet.
• Disconnect the power supply cord.
• Remember to release the water pressure inside the inlet hose. Press and hold the red pressure relief
button on the quick-connect until the flow of water stops.
• Disconnect the quick-connect hose assembly by pulling down on the outer locking collar, (thus releasing
the quick-connect from the faucet adapter).
Before Using Your Dishwasher
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
1 Rack
1 Cutlery / Silverware Basket
1 Measuring Spoon
1 Measuring Cup
1 Instruction Manual
Clean the interior surface with lukewarm water using a soft cloth.
Operating Instructions
To get the best performance from your dishwasher, read all operating instructions before using it for the
first time.
You can locate your model number on the tub wall just inside the door. Throughout this manual, features
and appearance may vary from your model.
Control Panel
1 Rinse-Aid Warning Indicator 4 Wash Program / Cycle Selector Knob
2 Start / Reset Light 5 ON / OFF Power Button
3 Start / Reset Button 6 Power Indicator Light
Status Indicator Light – Description
Light – OFF Dishwasher is in Stand-by mode.
Light - ON Dishwasher is in PAUSE mode.
Light – Flashing Dishwasher is in RUN mode.