Blue Angel Pumps BSS20 - Manual

© 2011, Blue Angel Pumps,
Harrison, Ohio 353502-002 4/11
Submersible Sump
System
Operating Instructions and Parts Manual
BSS10, BSS20, BSS25, BSSF50
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or
maintain the product described. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property damage! Retain instructions for
future reference.
Description
This submersible sump system is
designed for indoor home sump
applications. The system consists of
a primary sump pump and a back-up
sump pump.
The primary system operates on
120-volt household electric power. It
is equipped with a 3-prong grounding
type power cord. The motor is dielectric
oil filled and sealed for cooler running
and is designed to operate under water.
The battery operated back-up sump
pump is included in the event that
the primary pump cannot function. It
does not replace the primary pump.
A float switch automatically turns on
the backup sump pump when water
activates the float. A battery (not
included) must be installed to operate
the back-up sump pump.
Unpacking
Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, call our
customer service department at
1-888-636-6628.
The Professional’s Line
For parts, product & service information
visit www.blueangelpumps.com
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
s Primary pump l Back-up pump
Specifications
BSS10 BSS20 BSS25 BSSF50
Power Supply
Requirements 120 V, 60 Hz s
12 V DC l
120 V, 60 Hz s
12 V DC l
120 V, 60 Hz s
12 V DC l
120 V, 60 Hz s
12 V DC l
Motor Single Phase,
Dielectric Oil
Filled s
Single Phase,
Dielectric Oil
Filled s
Single Phase,
Dielectric Oil
Filled s
Single Phase,
Dielectric Oil
Filled s
Liquid
Temperature
Range 40°F to 120°F 40°F to 120°F 40°F to 120°F 40°F to 120°F
Circuit
Requirements 15 A (min) s 15 A (min) s 15 A (min) s 15 A (min) s
Dimensions 11 in. high x
9 in. base
11-1/2 in. high x
9-3/4 in. base
11-1/2 in. high x
12 in. base
11-1/2 in. high x
12 in. base
Construction
BSS10 BSS20 BSS25 BSSF50
Motor
Housing Glass Reinforced
Thermoplastic
sl
Cold Rolled Steel
s
Glass Reinforced
Thermoplastic l
Cold Rolled Steel
s
Glass Reinforced
Thermoplastic l
Cold Rolled Steel
s
Glass Reinforced
Thermoplastic l
Volute Thermoplastic
sl
Cast Iron s
Glass Reinforced
Thermoplastic l
Cast Iron s
Glass Reinforced
Thermoplastic l
Cast Iron s
Glass Reinforced
Thermoplastic l
Impeller Glass Reinforced
Thermoplastic
Glass Reinforced
Thermoplastic
Glass Reinforced
Thermoplastic
Glass Reinforced
Thermoplastic
Shaft Steel Steel Steel Steel
Discharge 1-1/2 in. NPT s
1-1/4 in. or
1-1/2 in. socket l
1-1/2 in. NPT s
1-1/4 in. or
1-1/2 in. socket l
1-1/2 in. NPT s
1-1/2 in. socket l
1-1/2 in. NPT s
1-1/2 in. socket l