ROTRONIC CF8-W-Disp-AL - Manual

Dokument
UMA 145 Rev
3 Page
1 (8)
User manual
CF8-W-Disp-AL
CO
2
transmitter with two relays prepared for
Modbus communication protocol
General
The IAQ-sensor product CF8-W-Disp-AL is used to measure indoor air carbon
dioxide concentration in rooms. It is flexible controller with programmable output for
relay control of e.g. mixed air dampers, humidifier and fans. The measured values
are shown on the display. The sensor is designed for wall mounting.
The unit is designed for connecting to Direct Digital Control (DDC). The linear output
functions are pre-programmed as CO
2
transmitters with jumper selected outputs. The
measuring ranges can be modified from a PC (Windows) and use of the software UIP
(version 4.3 or higher) together with the RS232 communication cable.
Figure 1 CF8-W-Disp-AL for wall mounting