Setup display, General tab — custom- izing the condition banner – Setra System SRCM User Manual

Page 16

Advertising
background image

16

Setup Display

to configure Condition Banner messages and other Home screen options. There

are four tabs for display customization; General, Advanced, Condition Banner,

Set Time and Date.

The General tab allows the user to define messages for each Condition Banner

color. Pressing anywhere in the colored region of the Condition Banner changes

each selection between GREEN, YELLOW, RED, and BLUE. By pressing on

the colored region of text, the on-screen keyboard pops up, enabling data entry.

If User Defined Text is Disabled, then data entry on the Condition Banner will

not be permitted. Change user defined text to enabled to change the text of each

banner.

There are four condition banner colors available, Green, Yellow, Red and Blue.

In the Setup Display General tab you can configure the text to be displayed

above and below the center symbol by enabling the User defined text.

If you

want the banner to blink, Enable the Blink selection.

If any alarm occurs, the condition banner will turn to red and text above and

below the center symbol will display ALARM

The Advanced tab allows the user to make refinements in how information is

Configure whether the user can

change the text of the Condition

Banner. Enabled or Disabled

Configure if you want to enable

banner

When finished making changes,

press Save & Exit to store the

modifications. Or press Exit to

discard changes and return to

the previous screen.

Change color and text of

Condition Banner by pressing

anywhere in the colored region

Select Home screen language

desired, English or French

General Tab — Custom-
izing the
Condition Banner

Advertising