Acer 4740G - Manual (Page 118)

108 Chapter 3
Replacing the LCD Panel
1. Align the LCD brackets with the six (6) screw holes (three on each side) on the LCD Panel as shown.
2. Replace the six (6) securing screws. On each side replace the screws in numeric order, from 1 to 3.
3. Turn the panel over. Insert the LCD Panel cable
into the LCD Panel as shown (1). Replace the
securing strip (2).
4. Run the LCD cable as shown and press down
along the length of the cable to secure it in place.
5. Insert the LCD panel into the casing back edge first
as shown.
6. Ensure that the four (4) locating pins are properly
seated before continuing.
2
3
1
2
1
3
2
1