Acer 4740G - Manual (Page 125)

Chapter 3 115
Replacing the Mainboard
1. Ensure that the Mainboard is face up. Place the Mainboard in the chassis, left hand edge first to allow the
I/O Ports through the casing, then lower it into place.
2. Ensure the screw socket is aligned. Replace the one (1) securing screw as shown.
NOTE: Make sure the I/O ports are positioned correctly through the lower cover, and the screw sockets are
visible through the mainboard.
3. Replace the RJ-11 cable in the retaining clip on the Mainboard.