Replacing the touchpad bracket, Replacing the finger print reader – Acer 4740G User Manual
Page 130
Advertising
120
Chapter 3
Replacing the TouchPad Bracket
Replacing the Finger Print Reader
1. Place the TouchPad in the casing.
2. Replace the two securing screws.
3. Replace the FFC and close the locking latch.
4. Run the cable along the Bracket and press down to
secure it in place.
1. Replace the Finger Print Reader in the Upper
Cover in the direction of the arrow.
2. Run the FFC along the TouchPad bracket and
replace the adhesive tape.
Advertising
This manual is related to the following products: