Auerswald 1500 - Manual (Page 11)

Preparation
11
11. Put the cables into the existing cable channels and empty spaces in such a
manner that the cables will not fall and cause the telephone to wobble.
Connecting the Receiver
Steps to take
1. Insert the plug, as is shown below in Fig. 2 , on the longer straight end of the
spiral cord into the jack marked with on the bottom of the telephone.
2. Guide the cable to the outside using the corresponding cable channel (see
Fig. 2 ).
3. Insert the other end of the spiral cord into the jack on the receiver.
Fig. 2: Receiver Connection