Auerswald 1500 - Manual (Page 26)

Appendix
26
2. Press the softkeys, one after the other, next to the option settings, syn-
chronisation, distr. firmware and immediately.
L You can use the softkeys (keys next to the display) in any list to
browse to the required option.
1
The firmware is distributed. During the distribution process,
Server Mode is displayed on the display panel of the distributing
system telephone. It is not possible to use the system telephone
during this process.
Releasing the COMfortel Voicemail Function (only for
COMfortel 2500)
Note: In the COMfortel 2500 AB (special COMfortel 2500 model), the
COMfortel Voicemail function and the SD card with various professional
announcements required for it are included in the factory settings. The acti-
vation of the COMfortel Voicemail function described at the end is omitted.
Note: The remaining testing time for the COMfortel Voicemail function can
be queried (in the telephone menu under answer.machine
̈ settings
̈ release).
Note: You can also request your authorized dealer to perform the release
in the Upgrade Centre.
Requirements
✔ PC with an active connection to the Internet
✔ User name and password (you will receive them when registering/creating
a user account in the Upgrade Centre). If applicable, register/create a user
account prior to attempting to make any purchases. See below.
✔ 12-digit serial number of the telephone. Review the 12-digit serial number
of the telephone in the information menu (see
page 24 ) and write it down.
Important: The 10-digit serial number found on the telephone label or on
the package wrapper is not sufficient for activation.
Steps to take
1. Open the Upgrade Centre over the Internet (Internet address: www.auer-
swald.de/upgradecenter).
2. If you do not already have one, first create a user account. To do this, click
Forward, User administration and Registration (create a user ac-
☞
☞
☞
☞