Brother MFC 8480DN - Manual (Page 9)

Store Print Log to Network
7
1
How to configure the SNTP protocol using
Web Based Management
1
SNTP is the protocol used to synchronize the time used by the machine for Authentication with the SNTP
time server (this time is not the time displayed on the LCD of the machine). You can configure this setting
using Web Based Management (web browser).
To use Web Based Management, type http//xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address of your
machine) into your browser, and then you can configure the settings of SNTP in Configure Protocol in
Network Configuration.
a Select the SNTP check box to activate the setting.