Brother MFC-250C - Manual (Page 67)

53
9
9
Fax reports
9
You need to set up the Transmission
Verification Report and Journal Period using
the Menu key.
Transmission Verification
Report
9
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the sender’s name or fax number,
the time and date of transmission, duration of
transmission, number of pages sent, and
whether or not the transmission was
successful.
There are several settings available for the
Transmission Verification Report:
„ On: Prints a report after every fax you
send.
„ On+Image: Prints a report after every fax
you send. A portion of the fax’s first page
appears on the report.
„ Off: Prints a report only if your fax is
unsuccessful due to a transmission error.
Off is the default setting.
„ Off+Image: Prints a report only if your
fax is unsuccessful due to a transmission
error. A portion of the fax’s first page
appears on the report.
a
Press Menu, 2, 3, 1.
b
Press a or b to choose Off+Image, On,
On+Image or Off.
Press OK.
c
Press Stop/Exit.
Note
• If you choose On+Image or Off+Image,
the image will only appear on the
Transmission Verification Report if Real
Time Transmission is set to Off. (See Real
time transmission on page 30.)
• If your transmission is successful, "OK" will
appear next to "RESULT" on the
Transmission Verification Report. If
transmission is not successful, "NG" will
appear next to "RESULT".
Printing Reports
9