Brother MFC-250C - Manual (Page 72)

Chapter 10
58
Changing copy quality
10
You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instructions below:
a
Make sure you are in Copy mode .
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Quality.
Press OK.
e
Press a or b to choose Normal, Best or
Fast. Press OK.
f
Press Black Start or Color Start.
To change the default setting, follow the
instructions below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Normal, Best or
Fast. Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
10
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
Press
and then a or b
to choose
Quality
Normal Normal is the
recommended
mode for ordinary
printouts. This
produces good copy
quality with good
copy speed.
Fast Fast copy speed
and lowest ink
consumption. Use to
save time printing
documents to be
proof-read, large
documents or many
copies.
Best Use best mode to
copy precise images
such as
photographs. This
provides the highest
resolution and the
slowest speed.
Press Fit to Page
and then a or b to
choose
Enlarge/Reduce
Custom(25-400%)
198% 4"x6"iA4
186% 4"x6"iLTR
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
78% LGLiLTR
46% LTRi4"x6"