Brother HL-1240 - Manual (Page 30)

1-22
To print on thicker paper and card
The printer has a straight paper path from the manual feed slot to the rear of the
printer when the rear cover is lifted upwards. Use this paper feed and output
method when you want to print on thicker paper or card.




1.
Select manual feed mode in the printer driver.




2.
Lift up the rear cover at the rear of the printer.
Fig. 1-18 Lift up the rear cover




3.
Send the print data as usual.

Note
A “
NO PAPER ” message is shown in the Status Monitor until you insert a sheet of
paper into the manual feed slot.
Ready
Alarm
Paper
Toner
Data
Drum
Fig. 1-19 No paper