Brother MFC 8480DN - Manual (Page 178)

Scanning
170
9
Using the Scan key (For USB cable users)
9
Note
If you use Scan on a network, see Using the Scan key on page 203.
You can use (Scan) on the control panel to scan documents directly into your word processing,
graphics or E-mail applications or to a folder on your Macintosh.
Before you can use (Scan) on the control panel, you have to install the Brother MFL-Pro Suite and
connect the machine to your Macintosh. If you installed the MFL-Pro Suite from the included CD-ROM, then
the correct drivers and ControlCenter2 are installed. Scanning by (Scan) follows the configuration on
the Device Button tab. (See SCAN on page 182.) For details about how to configure the ControlCenter2
buttons to launch the application of your choice using (Scan), see Using ControlCenter2 on page 180.
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from the following table:
Document Layout Table
• Duplex scan is not supported by the DCP-8080DN and MFC-8480DN.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
• The XPS file format is available for Windows Vista
®
or when using applications which support XML Paper
Specification files.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)