Brother HL-6050DN - Manual (Page 111)

4 - 11 OPTIONS
DIMM
The HL-6050, HL-6050D and HL-6050DN printers have 32 MB of standard memory and one slot for
optional memory expansion. You can expand the memory up to 160 MB by installing dual in-line memory
modules (DIMMs).
You can install the following DIMMs:
■ 16 MB TechWorks 12456-0001
■ 32 MB TechWorks 12457-0001
■ 64 MB TechWorks 12458-0001
■ 128 MB TechWorks 12459-0001
In general, the DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS latency: 2 or 3
Clock frequency: 66 MHz or more
Capacity: 16, 32, 64 or 128 MB
Height: 35 mm (1.4 in.) or less
Parity: NONE
Dram Type: SDRAM 4 Bank
SDRAM can be used.
For more information, visit Techworks website at http://www.techworks.com
■ There might be some DIMMs that will not work with the printer.
■ For more information, call the dealer you bought the printer from or Brother Customer Service.
■ For the latest information and drivers, visit the Brother Solutions Center at
http://solutions.brother.com