Brother HL-6050DN - Manual (Page 78)

CONTROL PANEL 3 - 7
+ or - button
If you press the + or - button when the printer is online (READY), it goes offline and the LCD displays the
menu.
To move through menus on the LCD
If you press the + or - button when the printer is online (READY), it goes offline and the LCD displays the
current mode.
You can go to other menus by pressing the + or - button. Pressing the + or - button allows you to move
forward or backward through the menus and settings on the display. Press or keep pressing the button
until you see the setting you want.
To enter numbers
You can enter numbers in two ways. You can press the + or - button to move up or down one number
at a time, or you can hold down the + or - button to move faster. When you see the number you want,
press the Set button.
Back button
If you press the Back button when the printer is online (READY), it goes offline and the LCD returns to
the menu.
Pressing the Back button allows you to return to the previous level from the current menu level.
The Back button also allows you to choose the previous digit while setting numbers.
When you select a setting and it does not have an asterisk (Set button was not pressed), the Back button
allows you to return to the previous menu level with the original setting unchanged.
Set button
If you press the Set button when the printer is online (READY), it goes offline and the LCD returns to the
menu.
Pressing the Set button allows you to choose the displayed menu or option. After changing a setting, an
asterisk (*) appears briefly on the right-hand side of the message.
When you press the Set button to choose a setting, an asterisk appears briefly at the end of the
display. Since the asterisk shows what you have chosen, you can easily see the current settings as
you look through the display.