Brother MFC-9330CDW - Manual (Page 38)

Chapter 4
30
Paging
4
When Paging is chosen, the machine dials
the cell phone or pager number you
programmed. This activates your cell phone
or pager so you will know there is a fax
message in the machine’s memory.
If you turn on Paging, a backup copy will
automatically be printed at the machine.
a
Press .
b
Press All Settings .
c
Swipe up or down, or press a or b to
display
Fax .
d
Press Fax .
e
Swipe up or down, or press a or b to
display
Setup Receive .
f
Press Setup Receive .
g
Swipe up or down, or press a or b to
display
Memory Receive .
h
Press Memory Receive .
i
Swipe up or down, or press a or b to
display
Paging .
j
Press Paging .
k
Enter your cell phone or pager number
followed by # # (up to 20 digits) using the
keyboard on the Touchscreen.
Press
OK .
Do not include the area code if it is the
same as that of your machine.
For example, press
18005551234##.
l
Do one of the following:

If you are programming a cell phone
number, press
OK .
 If your pager needs a PIN, enter the
PIN, press #, press
Pause , enter
your fax number followed by ##.
Press
OK . (For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7
8 9 # # )

If you do not need a PIN, press OK .
m
Press .
NOTE
You cannot change a pager number, cell
phone number or PIN remotely.