Brother MFC-440CN User Manual
Network user’s guide
Advertising
NETWORK
USER’S GUIDE
Multi-Protocol On-board Multi-function Print Server
Please read this manual thoroughly before using this
machine on your network. You can print or view this manual
from the CD-ROM at any time, please keep the CD-ROM in
a convenient place for quick and easy reference at all
times.
The Brother Solutionis your one stop resource for all your printing needs.
Download the latest drivers and utilities for your machine,
read FAQs and troubleshooting tips.
Version
A
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- NETWORK USER'S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your network printer
- Overview
- IP addresses, subnet masks and gateways
- Setting the IP address and subnet mask
- Changing the print server settings
- 3 Control panel setup
- 4 Driver Deployment Wizard (Windows® only)
- 5 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
- 6 Network printing from a Macintosh®
- 7 Brother Internet Fax Printing Software (MFC models only)
- 8 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and Administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS 1 to configure the IP address
- Installation when using a Network Print Queue or Share (printer driver only)
- Multi-function Print Server specifications
- Function Table and Default Factory Settings
- Index