Brother MFC 7460DN - Manual (Page 67)

Routine maintenance
61
A
Checking the machine
A
Checking the Page Counters
A
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a
For MFC-7360N, MFC-7365DN and
MFC-7460DN, press Menu, 6, 2.
For MFC-7860DW, press Menu, 7, 2.
Machine Info.
2.Page Counter
b
Press a or b to see Total, Fax/List,
Copy or Print.
c
Press Stop/Exit.
Checking the remaining life of
parts
A
You can see the machine’s parts life on the
LCD.
a
For MFC-7360N, MFC-7365DN and
MFC-7460DN, press Menu, 6, 3.
For MFC-7860DW, press Menu, 7, 3.
Machine Info.
3.Drum Life
b
Press Stop/Exit.
Note
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part’s life counter was reset during
the life of the used part.
Packing and shipping
the machine
A
Note
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridges, and printed materials to use
with your ‘Exchange’ machine.
a
Turn off the machine's power switch.
Disconnect all the cables, and then
unplug the power cord from the AC
power outlet. Leave the machine turned
off for at least 10 minutes to cool down.
b
Open the front cover.
c
Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.