Brother MFC-3320CN - Manual (Page 40)

FRONT PANEL SETUP 3 - 17
NC9100h_FM6.0
Setup Misc.
Ethernet
Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT half duplex mode by
auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print
server link mode. This change is valid after the print server has been
reset (default is
Auto ).
1 Press Menu/Set , 5 , 6 , 1 .
2 Press or to select Auto/100B-FD/100B-HD/
10B-FD/10B-HD .
3 Press Menu/Set .
4 Press Stop/Exit .
Time Zone
This field displays the time zone you can set for your country. The
time is the difference between your location and Greenwich Mean
Time. This time will be shown on documents received via the
Internet. For example the Time Zone for Eastern Time in the USA
and Canada is GMT-05:00.
1 Press Menu/Set , 5 , 6 , 2 .
2 Enter the time.
3 Press or to press Menu/Set to accept the selection.
4 Press Stop/Exit to exit the configuration menu.
If you incorrectly set this value, you may not be able to
communicate with your print server.