Brother MFC-3320CN - Manual (Page 94)

APPENDIX A - 3
NC9100h_FM6.0
Reloading the Print / FAX Server
Firmware
General
The firmware on the Print/Fax server is stored in flash memory. This
means that you can upgrade the firmware by downloading the
appropriate update file. To get the latest firmware update, visit the
Brother Solutions web site at http://solutions.brother.com/
Because of this, we STRONGLY recommend that you make a note
of the current Print/Fax server configuration before you upgrade. To
do this, print out a configuration page (Refer to this User’s Guide
Chapter 3 for information on how to print a configuration page).
There are two methods of upgrading the firmware in your Brother
Print/Fax server:
1 Use the BRAdmin Professional utility (Recommended)
2 Use another system (such as a Novell or Unix system to send
the new firmware file to the Print/Fax server).
Some software versions that we provide will automatically
factory reset your Print/Fax server parameters. We try to
avoid doing this. However, if we add a significant new feature
to our Print/Fax server, it can result in the Print/Fax server
being factory reset.