Brother HL-5050 - Manual (Page 25)

1 - 14 UNIX PRINTING
YL4US_FAX2800MFC4800-FM5.5
If you have not created a spool directory for the Brother print server
on your UNIX host computer, you will need to do so now (the printer
setup utilities in HP/UX, AIX, Solaris 2.xx, and other systems will
automatically create the spool directory). The lpd spool directory is
usually located in the
/usr/spool directory (check with your
system manager to see if the location is different for your system). To
create a new spool directory, use the
mkdir command. For
example, to create a spool directory for the queue laser1, you would
enter:
mkdir /usr/spool/lpd/laser1
On some systems it is also necessary to start the daemon. This is
done on Berkeley-compatible UNIX systems with the
lpc start
command as shown in the following example:
lpc start laser1
Other Sources of Information
1 Visit http://solutions.brother.com/ for more information on
network printing.
2 Refer to chapter 10 of this user guide to learn how to configure
the IP address of the printer.