Brother HL-5050 - Manual (Page 89)

7 - 3 APPLETALK (ETHERTALK) TCP/IP PRINTING
YL4US_FAX2800MFC4800-FM5.5
The appropriate PPD file supplied with your printer must first be
installed. Insert the CD-ROM into the CD-ROM drive of your
computer. Select the Start Here icon, select your language and
follow the on-screen instructions for Install Software.
Figure 1 Typical Macintosh Installer
The above screenshot is from a Brother HL-7050 series printer
driver. However, you will see a similar screen for all Brother printers
that include a Macintosh printer driver.
How to Select the Print Server
(AppleTalk/EtherTalk)
Once the print server is connected on your network and the printer is
powered on, the Brother print server’s AppleTalk service name
(default is
BRN_xxxxxx_P1_AT , where xxxxxx is the last six digits
of the Ethernet address (MAC address) should appear in the
Chooser.
You can find the service name and MAC address by printing out the
printer configuration page. Refer to the Quick Setup Guide for
information on how to print the configuration page on your print
server.