Brother DCP-385C - Manual (Page 200)

Scanning
192
10
For Touchscreen models
10
Setting the new default
10
a Press the (Scan) key.
b Press Scan to Media.
c Press and choose your new setting. Repeat this step for each setting you want to change.
d
After changing the last setting, press Set New Default.
e
Press Yes to confirm.
f
Press Stop/Exit.
Factory reset
10
a
Press the (Scan) key.
b
Press Scan to Media.
c
Press Factory Reset.
d
Press Yes to confirm.
e
Press Stop/Exit.