Brother DCP-385C - Manual (Page 224)

Network Scanning (For models with built-in network support)
216
12
Using the Scan key
12
Note
If you are connected using USB, see Using the Scan key (For USB cable users) on page 182.
Scan to E-mail (PC)
12
When you choose Scan to E-mail, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the default E-mail application on the designated
Macintosh
®
for addressing to the recipient. You can scan a black and white or color document and it will be
sent with the E-mail from the Macintosh
®
as an attachment.
a
Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to E-mail.
Press OK.
d (For MFC-6490CW)
Press a or b to choose PC.
Press OK.
e
Press a or b to choose the destination Macintosh
®
you want to use for E-mailing your document.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
Macintosh
®
on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN
number. Press OK.
f
Press Black Start or Color Start.
The machine starts the scanning process.