Step1 setting up the mfc, 1 install the drum unit assembly, Setting up the mfc – Brother MFC-7820N User Manual
Page 6: Install the drum unit assembly, Step 1, 1install the drum unit assembly
Advertising
4
Setting Up the MFC
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Open the front cover of the MFC.
2
Unpack the drum unit assembly.
3
Gently rock it from side to side several times
to distribute the toner evenly inside the
assembly.
4
Put the drum unit assembly into the MFC.
5
Close the front cover of the MFC.
1
Install the Drum Unit
Assembly
Front Cover
Step 1
Advertising
This manual is related to the following products: