Brother MFC-J630W - Manual (Page 57)

43
8
8
How to copy
8
The following steps show the basic copy
operation. For details about each option, see
the Advanced User’s Guide.
a
When you want to make a copy, press
(COPY) to illuminate it in blue.
 Make sure you are in copy mode.
 The LCD shows:
1 No. of Copies
You can enter the number of copies you
want by using the dial pad.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer in
chapter 1 in the Advanced User’s Guide.)
b
Do one of the following to load your
document:
 Place the document face down in the
ADF.
(See Using the ADF on page 22.)
 Load your document face down on
the scanner glass.
(See Using the scanner glass
on page 22.)
c
If you want more than one copy, enter
the number (up to 99).
d
Press Black Start or Color Start.
Stop copying
8
To stop copying, press Stop/Exit.
Making copies
8
1 01 01
COPY COPY
Quality Normal
Ratio:
Copy Press Start
Enlarge/Reduce 100%