Brother MFC-J430W - Manual (Page 22)

22
For Wireless Network Users
20 Setup using the CD-ROM
installer and a USB cable
(Windows
®
only)
a
Put the supplied installer CD-ROM into your
CD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
b
The CD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
c
Choose Wireless Network Connection, and
then click Next.
d
When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
If you are using a firewall other than the
Windows
® Firewall or the Windows ® Firewall is
off, this screen may appear.
See the instructions provided with your firewall
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP port 137 and 161.
e
Choose Use your computer or the control
panel directly. and then click Next.
You need to temporarily use a USB cable
during configuration (cable not included).
Note
If the Brother screen does not appear
automatically, go to My Computer (Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
Note
For Windows Vista ® and Windows ® 7, when the
User Account Control screen appears, click
Allow or Yes.