Brother PT-1910 - Manual (Page 31)

23
To select a preset format:
1 Hold down c and press Y once. The currently selected setting appears in the dis-
play.
2 Press h or e to select the desired setting.
☞
To return to default settings, press _.
3 Press r to apply the selected setting.
☞
The Length indicator comes on if any setting other than DEFAULT is selected.
EXAMPLE
The Stamp function allows you to quickly and easily create your own stamp stencil films for
customized stamps. After inserting a stamp film cassette, select this function to automatically
center the text and adjust the tape length and margins to a perfect format for the pre-inked
stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and
replace the one in the holder.
To make a stamp:
1
Type in the text, and then insert a medium (3/4” (18-mm) wide) stamp film cassette.
2 Hold down c and press U once. The message “STAMP FORMAT?” appears in the
display.
To select the AUDIO CASSETTE setting:
1 Hold down c and press Y .
2 Press h or e until the AUDIO CASSETTE
setting is displayed.
3 Press r .
D E F A U L T
C A S S E T T E
A U D I O
STAMP FUNCTION