Brother HL-7050N - Manual (Page 72)

NOVELL NETWARE PRINTING 6 - 6
YL4US_FAX2800MFC4800-FM5.5
Configuring Netware 3 and NetWare 4 systems
Brother's BRAdmin application provides similar functionality to the
NetWare PCONSOLE utility (or the NWADMIN utility in NetWare
4.1x or later). To use the BRAdmin application to configure a Brother
print server under NetWare, make sure that you are logged in as
SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or
later) and perform the appropriate steps as detailed in the following
pages.
Configuring the Brother Print Server
(Queue Server Mode in Bindery emulation mode)
using BRAdmin
1 Make sure that you logged in as SUPERVISOR (NetWare 2.xx
or 3.xx) or ADMIN (NetWare 4.xx or later).
2 Start BRAdmin.
3 One or more print servers will appear in the list (the default node
names are
BRN_xxxxxx , where xxxxxx is the last six digits of
the Ethernet address (MAC address)).
4 Select the print server that you wish to configure and double
click it. You will be asked for a password. The default password
is
access .
5 Select the NetWare tab.
You must install the Novell NetWare Client 32 if you wish to
create queue information on your NetWare servers by
BRAdmin.
You can find the node name and MAC address by printing
out the printer configuration page. Refer to the Quick Setup
Guide for information on how to printer the configuration
page on your print server.